Stock #: Q11383
Brand: GIDDINGS & LEWIS
Model: H700-FX
Type: Boring Mills, Horizontal, Floor Type
Condition: Very Good
Year: 1996
G & L 8000 CNC Controls, (2) 120" x 120" Full Contouring Rotary Tables on their own Ways w/ 60" Travel and 150,000 LB Cap Each, Power Drawbar, Thru Spindle Coolant, Cat 60 Taper, 102 Station Automatic Tool Changer, (1) Add-on Right Angle Head That Can Mill, Drill and Tap.
NOTES:
Machine Was Rebuilt 2007.
The Rotary Tables Were Rebuilt in 2014 and 2016.
Rigging Assistance Available.
Specifications: |
|
|---|---|
| CNC Control | yes |
| Type of CNC Control | G & L 8000 CNC Control |
| Spindle Diameter | 7" |
| Table Load Capacity | 150,0000 LBS |
| Rotary Table Size | (2) 120" x 120" Full Contouring |
| Rotary Table Load Capacity | 150,000 LBS Each |
| X-Axis (Column Cross Travel) | 408" |
| Y-Axis (Vertical Travel) | 166" |
| Z-Axis (Spindle (Quill) Travel) | 50" |
| W-Axis (Column Longitudinal Travel) | 72" |
| B-Axis (Rotary Table Positions) | 360,000° |
| Rapid Traverse (X/Y/Z) | 300 IPM |
| Spindle Quill Diameter | 7" |
| Spindle Taper | CAT 60 |
| Spindle Horsepower | 75 HP |
| Spindle Speed Range | 12 - 2,200 RPM |
| Coolant Thru Spindle | yes |
| Automatic Tool Changer Capacity (ATC) | 102 |
| Electrics | 440/3/60 |
CONDITION: In Daily Use holding +/- .001. Machine Rebuilt in 2007. Rotary Tables in 2014. This Machine Appears to be in Very Good Condition.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Brand
GIDDINGS & LEWIS
Model
H700-FX
Type
Boring Mills, Horizontal, Floor Type
Stock #
Q11383
Condition
Very Good
Year
1996
Equipped With |
|---|
|
G & L 8000 CNC Controls, (2) 120" x 120" Full Contouring Rotary Tables on their own Ways w/ 60" Travel and 150,000 LB Cap Each, Power Drawbar, Thru Spindle Coolant, Cat 60 Taper, 102 Station Automatic Tool Changer, (1) Add-on Right Angle Head That Can Mill, Drill and Tap. NOTES: Machine Was Rebuilt 2007. The Rotary Tables Were Rebuilt in 2014 and 2016. Rigging Assistance Available. |
Specifications |
|
|---|---|
| CNC Control | yes |
| Type of CNC Control | G & L 8000 CNC Control |
| Spindle Diameter | 7" |
| Table Load Capacity | 150,0000 LBS |
| Rotary Table Size | (2) 120" x 120" Full Contouring |
| Rotary Table Load Capacity | 150,000 LBS Each |
| X-Axis (Column Cross Travel) | 408" |
| Y-Axis (Vertical Travel) | 166" |
| Z-Axis (Spindle (Quill) Travel) | 50" |
| W-Axis (Column Longitudinal Travel) | 72" |
| B-Axis (Rotary Table Positions) | 360,000° |
| Rapid Traverse (X/Y/Z) | 300 IPM |
| Spindle Quill Diameter | 7" |
| Spindle Taper | CAT 60 |
| Spindle Horsepower | 75 HP |
| Spindle Speed Range | 12 - 2,200 RPM |
| Coolant Thru Spindle | yes |
| Automatic Tool Changer Capacity (ATC) | 102 |
| Electrics | 440/3/60 |
| CONDITION: In Daily Use holding +/- .001. Machine Rebuilt in 2007. Rotary Tables in 2014. This Machine Appears to be in Very Good Condition. |
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
© 2025 — Great American Equipment Company. All Rights Reserved. — Privacy Policy. — Archive
