Stock #: Q11793
Brand: ENCODER PRODUCTS
Model: Accu-Coder 100020-9
Type: Sensors
Condition: Excellent
Year: Not Specified
FEATURES:
The RX/TX Converter converts a Push-Pull or NPN encoder output to an RS422 compatible differential Line Driver output. In addition, it will also convert Line Driver/RS422 encoder output to single ended signals (PushPull) for compatibility with certain PLC's.
Each converter has two independent channels: Channel 1 is equipped with a differential Line Receiver on the input. It then converts these differential signals (A, A’, B, B’, Z, Z’) to Push-Pull output signals (A, B, Z), with an amplitude equivalent to Vcc.
Channel 2 will convert single ended signals from a Push-Pull or NPN Open Collector encoder to Differential Line Driver signals. Differential Line Driver signals include complementary outputs A’, B’, and Z’ which offer greater immunity to electrical noise, signal distortion, and interference, especially with long cable runs.
Specifications: |
|
|---|---|
| Type | RX/TX Converter |
| Supply Source (Vcc) | 5 to 24 VDC |
| Max Current Consumption | 20 mA (plus encoder and output load requirements) |
| Max Frequency | Up to 1 MHz |
| Enclosure Rating | IP54 (dust proof) |
| Input Voltage: Channel 1 | 13 - 24 VDC |
| Input Voltage: Channel 2 | 5 VDC |
| Output Voltage: Channel 1 | Vcc |
| Output Voltage: Channel 2 | Vcc |
| Max Output Current | 30 mA/Channel |
| Approximate Dimensions | 6" x 3" |
| Approximate Height | 2" |
| Approximate Weight | 5 LBS |
CONDITION: This Converter Appears to be in Excellent Condition.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Equipped With |
|---|
|
FEATURES: The RX/TX Converter converts a Push-Pull or NPN encoder output to an RS422 compatible differential Line Driver output. In addition, it will also convert Line Driver/RS422 encoder output to single ended signals (PushPull) for compatibility with certain PLC's.
Each converter has two independent channels: Channel 1 is equipped with a differential Line Receiver on the input. It then converts these differential signals (A, A’, B, B’, Z, Z’) to Push-Pull output signals (A, B, Z), with an amplitude equivalent to Vcc.
Channel 2 will convert single ended signals from a Push-Pull or NPN Open Collector encoder to Differential Line Driver signals. Differential Line Driver signals include complementary outputs A’, B’, and Z’ which offer greater immunity to electrical noise, signal distortion, and interference, especially with long cable runs. |
Specifications |
|
|---|---|
| Type | RX/TX Converter |
| Supply Source (Vcc) | 5 to 24 VDC |
| Max Current Consumption | 20 mA (plus encoder and output load requirements) |
| Max Frequency | Up to 1 MHz |
| Enclosure Rating | IP54 (dust proof) |
| Input Voltage: Channel 1 | 13 - 24 VDC |
| Input Voltage: Channel 2 | 5 VDC |
| Output Voltage: Channel 1 | Vcc |
| Output Voltage: Channel 2 | Vcc |
| Max Output Current | 30 mA/Channel |
| Approximate Dimensions | 6" x 3" |
| Approximate Height | 2" |
| Approximate Weight | 5 LBS |
| CONDITION: This Converter Appears to be in Excellent Condition. |
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are required.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
© 2025 — Great American Equipment Company. All Rights Reserved. — Privacy Policy. — Archive
